Download scan applications list from your computer lexmark

Before you begin, make sure that:

• The printer firmware is updated. For more information, see the “Updating firmware” section.
• The computer and the printer are connected to the same network.

For Windows users

Using Lexmark ScanBack Utility

From the computer, run Lexmark ScanBack Utility, and then click Next.

Note: View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.

Note: Make sure that Scan Profiles is enabled. From the control panel, navigate to Settings > Device > Visible Home Screen Icons > Scan Profiles > Display. For non-touch-screen printer models, press to navigate through the settings.

Using Windows Fax and Scan

Note: Make sure that the printer is added to the computer. For more information, see Adding printers to a computer.

1. Load an original document into the automatic document feeder or on the scanner glass.
2. From the computer, open Windows Fax and Scan.
3. From the Source menu, select a scanner source.
4. If necessary, change the scan settings.
5. Scan the document.

For Macintosh users

Note: Make sure that the printer is added to the computer. For more information, see Adding printers to a computer.

1. Load an original document into the automatic document feeder or on the scanner glass.
2. From the computer, do either of the following:
   • Open Image Capture.
   • Open Printers & Scanners, and then select a printer. Click Scan >Open Scanner.
3. From the Scanner window, do one or more of the following:
   • Select where you want to save the scanned document.
   • Select the size of the original document.
   • To scan from the ADF, select Document Feeder from the Scan Menu or enable Use Document Feeder.
   • If necessary, configure the scan settings.
4. Click Scan.